Building Blocks · Training · Chapter 2 of 11 · 3 min read

The battery

Chapter 1 gave you a battery: the work you can do above threshold. During a ride BlockRide tracks it second by second and shows it on screen. This chapter explains what makes it fall, what brings it back, and what the game does with it.

Draining

Above threshold the rule is plain arithmetic. Every second, the battery loses the watts you are riding above threshold:

Battery lost each second = Power − CPOnly when power is above CP. Watts are joules per second.

Our example rider (250 W threshold, 20 kJ battery) riding at 300 W spends 50 J a second, so a full battery lasts 400 seconds. At 400 W it lasts 133 seconds. Twice as far over threshold empties it twice as fast.

Refilling

Below threshold the battery comes back, but not in a straight line. Philip Skiba and colleagues modelled this in 2012 and refined it in 2015. In the form BlockRide uses, the refill each second is:

Battery gained each second = (CP − Power) × (share of the battery that is empty)Only when power is below CP.

Two things speed it up. The easier you pedal, the bigger the first term. The emptier the battery, the bigger the second. So recovery is quick at first and slows as you fill up, like a phone on a charger. Soft-pedalling at 125 W, our rider gets back about two thirds of what was missing in the first 160 seconds, and needs the same time again for two thirds of the rest. At 240 W, just under threshold, the battery barely moves.

0510152025300%25%50%75%100%minutes37%20%16%14%320 W
Four 3-minute efforts at 320 W with 4 easy minutes between. The battery never quite refills, so each effort ends lower than the last.

What the game does with it

  • The battery tile. You see how much is left while you ride, and roughly how long it lasts at the power you are holding.
  • The most power you have right now. With a full battery you can reach your peak. As it empties, the most you can produce slides down towards threshold. That is why a sprint at the top of a hard climb is weaker than a sprint from fresh legs.
  • Efforts that end on the battery. Some workout steps have no timer. A "drain" ends when your battery reaches a set level, and the "refill" after it ends when the battery has climbed back. A rider with a small battery gets a shorter effort and a rider with a large one gets a longer effort, for the same strain. Fall short of the target power and the effort stretches. Go harder and it ends sooner.
  • Prediction. Before you start a workout, BlockRide rides it on paper with your numbers and shows the lowest point your battery should reach.

What it gets wrong

The battery is a model, and people differ. Skiba's 2015 study found that recovery speed varies a lot from one rider to the next, for reasons inside the muscle. Yours may refill faster or slower than the formula says. BlockRide handles this by checking the model against what you actually do: if you keep going after the battery reads empty, the profile was too small, and it is corrected. That correction is the subject of the next chapter.

The model also says that at threshold or below, the battery never drains. Anyone who has ridden four hours knows that isn't the whole truth. Researchers call the missing piece durability: how well your power holds up after hours of work. Maunder and colleagues argue it should be measured alongside threshold. BlockRide accounts for long-ride tiredness in a different place, the fatigue number in chapter 5.

The example rider (250 W, 20 kJ) is made up for the sums and is not a BlockRide setting.