Building Blocks · Training · Chapter 1 of 11 · 3 min read

Three numbers that describe you

Most training apps describe a rider with one number, usually the power they can hold for an hour. One number can't tell a climber from a sprinter, and it can't say how long you will last when the road tilts up and you go over your limit. BlockRide uses three.

  • Threshold, in watts. The highest power you can hold while your body stays in balance. Sports science calls it critical power, or CP.
  • Battery, in kilojoules. The work you can do above threshold before you have to back off. The papers call it W′, said "W prime".
  • Peak, in watts. The most you can produce for a few seconds.

The curve behind them

In 1965 Monod and Scherrer noticed that how long a muscle can keep working follows a simple curve. Sixty years of research since has confirmed it for whole-body exercise, in cycling more than anywhere. Above threshold, the power you can hold for a time t is:

Power = CP + W′ ÷ tCP in watts, W′ in joules, t in seconds.

Take a rider with a threshold of 250 W and a 20 kJ battery. For five minutes (300 s) the model gives 250 + 20,000 ÷ 300 = 317 W. For twenty minutes it gives 267 W. Turn the formula around and it tells you how long an effort lasts: at 350 W this rider is 100 W over threshold, so the 20,000 J battery is empty after 200 seconds.

151015202530200 W300 W400 W500 W600 Wminutesthreshold 250 W1 min: 583 W5 min: 317 W20 min: 267 W
An example rider: threshold 250 W, battery 20 kJ. The curve falls towards the threshold line and never crosses it.

Threshold is more than a point on a chart. Below it, oxygen use and blood lactate settle at a steady level and you can ride for a long time. Above it they keep climbing until you stop. Poole and colleagues call it the border between sustainable and unsustainable exercise, which is why BlockRide hangs everything else on it.

How BlockRide finds yours

There is no test to book. BlockRide looks at your recent rides and takes your best average power over several lengths, from a few minutes up to twenty. Multiply each power by its time and you get the work done. Plot work against time and the points fall close to a straight line:

Work = CP × t + W′The slope of the line is your threshold. Where it meets the axis is your battery.

BlockRide fits that line by least squares, the standard method. Peak power is simply your best few seconds.

Two things follow. First, the fit needs hard efforts of different lengths. A month of steady rides shows a threshold that is too low and no battery at all, so BlockRide refuses fits that make no sense and starts you on an estimate from your weight until your rides say more. Second, a power meter that glitches can invent an effort you never rode. Efforts far above anything you have done lately are treated as a spike and left out.

Why three numbers are worth it

Two riders can share a 250 W threshold. One has a small battery and wins by riding steadily for an hour. The other has a large battery and a high peak and wins in the last 300 metres. They need different workouts, they pace climbs differently, and one number would give them the same plan. With three, BlockRide can size an effort to the rider doing it. The next chapter shows how.

The curve fits best between about two and twenty minutes. For a few seconds it promises too much, which is why peak power is measured and not calculated. For several hours it also promises too much, because real riders tire in ways the curve leaves out. Chapter 11 comes back to this.

The example rider (250 W, 20 kJ) is made up for the sums and is not a BlockRide setting.